Cisco ASR 9000 Series Configuration Guidelines

index 2 mpls label 16100
/* Configure SR-TE policy */
segment-routing
traffic-eng
policy 100
color 1 end-point ipv4 2.2.2.2
candidate-paths
preference 400
explicit segment-list PE1-PE3-PE2
!
preference 500
explicit segment-list PE1-PE2
policy 1013
color 1013 end-point ipv4 2.2.2.2
candidate-paths
preference 100
explicit segment-list PE1-PE2_BE121
!
preference 200
explicit segment-list PE1-PE3-PE2-t0016
!
preference 500
explicit segment-list PE1-PE2
!
preference 600
explicit segment-list PE1-PE3-PE2
!
preference 700
explicit segment-list PE1-PE3-PE2_link
!
policy 1300
color 1300 end-point ipv4 3.3.3.3
candidate-paths
preference 100
explicit segment-list PE1-PE3
!
/* Configure VPLS over SR-TE policy
l2vpn
pw-class pw100
encapsulation mpls
preferred-path sr-te policy 100
pw-class pw1013
encapsulation mpls
preferred-path sr-te policy 1013 fallback disable
l2vpn
bridge group bg1
bridge-domain vpls501
interface Bundle-Ether41.501
!
interface TenGigE0/0/1/0.501
split-horizon group
!
vfi vpls1
neighbor 2.2.2.2 pw-id 501
pw-class pw100
!
neighbor 3.3.3.3 pw-id 501
/*Configure VPWS over SR-TE policy
L2VPN and Ethernet Services Configuration Guide for Cisco ASR 9000 Series Routers, IOS XR Release 6.3.x
645
L2VPN Services over Segment Routing for Traffic Engineering Policy
Running Configuration

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model