Cisco ASR 9000 Series Configuration Guidelines

!
P:
configure
segment-routing
traffic-eng
pce
address ipv4 205.2.0.2
!
PE2:
configure
segment-routing
traffic-eng
pcc
source-address ipv4 205.3.0.3
pce address ipv4 205.2.0.2
!
/* Configure SR Color */
PE1:
configure
extcommunity-set opaque color1
1
end-set
!
extcommunity-set opaque color2
2
end-set
!
extcommunity-set opaque color3
3
end-set
!
PE2:
configure
extcommunity-set opaque color11
11
end-set
!
extcommunity-set opaque color12
12
end-set
!
extcommunity-set opaque color13
13
end-set
!
/* Configure EVPN route policy */
PE1:
configure
route-policy evpn_odn_policy
if rd in (205.3.0.3:2) then
set extcommunity color color1
set next-hop 205.3.0.3
L2VPN and Ethernet Services Configuration Guide for Cisco ASR 9000 Series Routers, IOS XR Release 6.3.x
661
L2VPN Services over Segment Routing for Traffic Engineering Policy
Running Configuration

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model