Cisco D9865 Installation And Configuration Guide

Contents
vi
Cisco D9865 Satellite Receiver Software Version 2.20 Installation and Configuration Guide
OL-31085-01
Viewing the Version Information 4-58
Viewing Hardware Information 4-58
Viewing Service Information 4-59
Viewing Channel Information 4-60
Viewing DVB-CI Information 4-62
Viewing Device Status Information 4-63
Viewing the Active Alarm and Warning Messages 4-63
Viewing the RF Status 4-65
Viewing ADP Status 4-67
CHAPTER 5 Setup and Monitoring via Web GUI 5-1
Logging on to the Web GUI 5-2
Overview of the Main D9865 Settings 5-3
Linked Pages 5-5
D9865 Web GUI Environment 5-6
The Window Buttons 5-6
The About Window 5-7
Setting up Tuning Information 5-8
Setting Up Dish Pointing 5-10
To set up the dish in Installer Action mode: 5-11
Setting up SI Receive Parameters 5-13
Setting up Muting Threshold Controls 5-15
Setting up the Tuning Presets/LNB 5-17
Setting up LNB Presets 5-19
Viewing Input Status 5-20
Setting the Channel Information 5-21
Configuring the Common Interface (CI) Information 5-22
Viewing the PSI Tables 5-25
Viewing PSI Frequency Information 5-26
Viewing the PSI Channels 5-28
Setting up the Video 5-29
Configuring Captions 5-30
Setting up Subtitles 5-31
Setting up Audio 5-33
Viewing System Information 5-34
Viewing Features/Licenses 5-35
Setting Up IP Information 5-36
To Configure Management and Data Port Settings 5-36

Cisco D9865 Specifications

General

Brand	Cisco
Model	D9865
Category	Receiver
Language	English