Cisco ME 3600X User Manual

2-211
Cisco ME 3800X and ME 3600X Switch Command Reference
OL-28238-01
Chapter 2 Cisco ME 3800X and ME 3600X Switch Cisco IOS Commands
police
This example shows how to create policy map with a conform action of set dscp and a default exceed
action, and attach it to an EFP.
Switch(config)# class-map in-class-1
Switch(config-cmap)# match dscp 14
Switch(config-cmap)# exit
Switch(config)# policy-map in-policy
Switch(config-pmap)# class in-class-1
Switch(config-pmap-c)# police 230000 8000 conform-action set-dscp-transmit 33
exceed-action drop
Switch(config-pmap-c)# exit
Switch(config-pmap)# exit
Switch(config)# interface gigabitethernet0/1
Switch (config-if)# service instance 1 Ethernet
Switch (config-if-srv)# service-policy input in-policy
Switch (config-if-srv)# exit
This example shows how to use policy-map class police configuration mode to set multiple conform
actions and an exceed action. The policy map sets a committed information rate of 23000 bits per second
(b/sb/s) and a conform burst size of 10000 bytes. The policy map includes multiple conform actions (for
DSCP and for Layer 2 CoS) and an exceed action.
Switch(config)# class-map cos-set-1
Switch(config-cmap)# match cos 3
Switch(config-cmap)# exit
Switch(config)# policy-map map1
Switch(config-pmap)# class cos-set-1
Switch(config-pmap-c)# police cir 23000 bc 10000
Switch(config-pmap-c-police)# conform-action set-dscp-transmit 48
Switch(config-pmap-c-police)# conform-action set-cos-transmit 5
Switch(config-pmap-c-police)# exceed-action drop
Switch(config-pmap-c-police)# exit
Switch(config-pmap)# exit
Switch(config)# interface gigabitethernet0/1
Switch(config-if)# service-policy input map1
Switch(config-if)# exit
Related Commands Command Description
class Defines a traffic classification match criteria for the specified
class-map name.
conform-action Defines multiple actions for a policy-map class for packets that meet
the CIR and the PIR.
exceed-action Defines multiple actions for a policy-map class for packets that
exceed the CIR but are less than or equal to the PIR.
policy-map Creates or modifies a policy map that can be attached to multiple
ports to specify a service policy.
violate-action Defines multiple actions for a policy-map class for packets that
exceed the PIR.
show policy-map Displays QoS policy maps.

Cisco ME 3600X Specifications

General

Brand	Cisco
Model	ME 3600X
Category	Switch
Language	English