Cisco ME 3600X

-49
Cisco ME 3800X and ME 3600X Switch Command Reference
OL-28238-01
Chapter
spanning-tree portfast (interface configuration)
Examples This example shows how to enable the Port Fast feature on a port:
Switch(config)# interface gigabitethernet0/2
Switch(config-if)# spanning-tree portfast
Related Commands Command Description
show running-config Displays the operating configuration.
spanning-tree bpdufilter Prevents an interface from sending or receiving bridge protocol data
units (BPDUs).
spanning-tree bpduguard Puts an interface in the error-disabled state when it receives a
BPDU.
spanning-tree portfast (global
configuration)
Globally enables the BPDU filtering or the BPDU guard feature on
Port Fast-enabled STP ports or enables the Port Fast feature on all
nontrunking STP ports.