Cisco SCE2020-4XGBE-SM - Page 23

Contents
xxi
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
OL-7827-12
Capacity 13-9
Limitations 13-10
Backwards Compatibility 13-11
Configuring MPLS/VPN Support 13-11
Configuring the MPLS Environment 13-11
How to Check the Running Configuration 13-11
How to Configure the MPLS Environment 13-12
Configuring the SCE Platform for MPLS/VPN Support 13-12
Defining the PE Routers 13-12
Configuring the MAC Resolver 13-14
Monitoring the MAC Resolver 13-15
Configuring the SM for MPLS/VPN Support 13-16
how to Configure the SM for MPLS/VPN Support 13-16
How to Edit the SM Configuration File 13-16
How to Configure the SM to Allow IP Ranges 13-17
Managing MPLS/VPN Support 13-17
Managing MPLS/VPN Support via SNMP 13-17
MPLS/VPN MIB Objects 13-18
MPLS/VPN Traps 13-18
Monitoring MPLS/VPN Support via SCE Platform CLI 13-18
Displaying VPN-related Mappings 13-18
Clearing Upstream VPN Mappings 13-21
Monitoring Subscriber Counters 13-22
Monitoring MPLS/VPN Counters 13-23
Monitoring the PE Routers 13-23
Monitoring Bypassed VPNs 13-24
Monitoring Non-VPN Mappings 13-24
Managing MPLS/VPN Support via SM CLU 13-24
Managing VPNs 13-25
How to Add Mappings to VPN-based Subscribers 13-27
How to Remove VPN Mappings from Subscribers 13-28
How to Monitor Subscriber MPLS/VPN Mappings 13-29
CHAPTER 14 Managing the SCMP 14-1
Introduction 14-1
About SCMP 14-1
SCMP Terminology 14-2
Deployment Scenarios 14-3
Single ISG Router with a Single SCE Platform (1xISG – 1xSCE) 14-3