2201R Mobile Tester SCPI Reference Guide
Chapter 8 Configuration commands
47090/323
Copyright © 2016 Aeroflex Limited. All rights reserved.
107
:CONFigure:GSMR:VGCS:CPRI
Syntax
:CONFigure:GSM:GSMR:VGCS:CPRI <val>
Parameters
<val> is the value of call priority that is set in a VGCS call.
Description
This command sets the value of call priority for a VGCS call in a GSM-R system to be used after the 2201R is brought
into VGCS call mode.
Query
The query form of this command returns the current setting of call priority.
Example
:CONFigure:GSMR:VGCS:CPRI 1
:CONF:GSMR:VGCS:CPRI?
Value returned: "1".
Parameter Priority
00
11
22
33
44
6B
7A
To Next Page
Loading...
Need help?
General