2201R Mobile Tester SCPI Reference Guide
Chapter 9 Call commands
47090/323
Copyright © 2016 Aeroflex Limited. All rights reserved.
185
EDGE commands
:CALL:EGPRs:MSINfo:ALL
Syntax
:CALL:EGPRs:MSINfo:ALL
Parameters
There are no parameters.
Description
This command reads out all EGPRS MS Info result values with one query.
The query delivers back 3 single values in the following sequence, all separated by commas:
- IMSI (String) This is the international mobile subscriber identity.
- IMEI (String) This position contains the international mobile equipment identity.
- MClass shows the GPRS multislot class reported by the MS. Valid return values are in the range 1 to 29.
Query
There is only a query form of this command available. The query returns a string containing 15 values coded as
explained above.
Example
:CALL:EGPRs:MSINfo:ALL?
The string delivered back in this example is: "001010123456789",
"520040190000430",3.
:CALL:EGPRs:MSINfo:IMSI
Syntax
:CALL:EGPRs:MSINfo:IMSI
Parameters
There are no parameters.
Description
This query delivers back the international mobile subscriber identity as stored on the SIM card.
Query
There is only a query form of this command available. The query delivers back a string.
Example
:CALL:EGPRs:MSINfo:IMSI?
The string delivered back in this example is: "001010123456789".
To Next Page
Loading...
Need help?
General