2201R Mobile Tester SCPI Reference Guide
Chapter 5 System commands
47090/323
Copyright © 2016 Aeroflex Limited. All rights reserved.
53
:SYSTem:ERRor:CODE[:NEXT]?
Syntax
:SYSTem:ERRor:CODE[:NEXT]?
Parameters
There are no parameters.
Description
There is solely a query form of this command available.
Query
Returns the code of the oldest unread error message in the internal error queue of the 2201R. The string returned
contains one integer (and no text).
Note: An overview of all SCPI error messages can be found in section SCPI command errors.
Example
:SYSTem:ERRor:CODE?
String returned: -113
This means that there is an Undefined header.
:SYSTem:ERRor:CODE:ALL?
Syntax
:SYSTem:ERRor:CODE:ALL?
Parameters
There are no parameters.
Description
There is solely a query form of this command available.
Query
Returns the error codes of all unread error messages in the internal error queue of the 2201R. The string returned
contains a maximum of 10 integers, separated by commas.
Note: An overview of all SCPI error messages can be found in section SCPI command errors.
Example
:SYSTem:ERRor:CODE:ALL?
String returned: "-371,-113"
This means that there were two unread error messages in the error queue.
To Next Page
Loading...
Need help?
General