2201R Mobile Tester SCPI Reference Guide
Chapter 8 Configuration commands
47090/323
Copyright © 2016 Aeroflex Limited. All rights reserved.
109
:CONFigure:USSD:USTA
Syntax
:CONFigure:USSD:USTA
Parameters
No parameters.
Description
This command returns the status of the USSD registration/de-registration procedure.
1: If procedure is successful.
0: If procedure has failed.
Please note that this flag remains 0 until the USSD procedure is successful. If you are using this SCPI command, you
need to check this flag for a defined timeout.
Query
The query form of this command returns the current value of the USSD registration/de-registration procedure
success/failure status.
Success: 1
Failure: 0.
Example
:CONFigure:USSD:USTA?
Value returned: "1".
To Next Page
Loading...
Need help?
General