To Next Page

To Previous Page

2201R Mobile Tester SCPI Reference Guide

Chapter 8 Configuration commands

47090/323

121

:CONFigure:GPRS:BS:LAI:LAC

Syntax

:CONFigure:GPRS:BS:LAI:LAC <int1>

Parameters

int1 is an integer.

The minimum value for int1 is 0, the maximum value is 65535. The default value for int1 is 1.

Description

This command sets the location area code.

Query

The query form of this command returns the current setting. The string delivered back contains one integer.

Example

:CONFigure:GPRS:BS:LAI:LAC 17399

:CONF:GPRS:BS:LAI:LAC?

Value returned: "17399".

:CONFigure:GPRS:BS:LEVel

Syntax

:CONFigure:GPRS:BS:LEVel <real1>

Parameters

real1 is a floating point real number.

The minimum value for real1 is -110.0, the maximum value is -20.0. The resolution of real1 is 0.1. The default value

for real1 is -60.0.

Description

Sets the (standard) output level of the 2201R. If individual levels are selected for GPRS tests, this level is used on the

base channel. Applies to GSM/GPRS synchronous mode.

Query

The query form of this command returns the current setting. The string delivered back contains one real number.

Example

:CONFigure:GPRS:BS:LEVel -100.0

:CONF:GPRS:BS:LEVel?

Value returned: "-100.0".

COBHAM 2201R Reference Guide

Other manuals for COBHAM 2201R