To Next Page

To Previous Page

2201R Mobile Tester SCPI Reference Guide

Chapter 8 Configuration commands

47090/323

:CONFigure:GSM:BS:ATTach

Syntax

:CONFigure:GSM:BS:ATTach <PredefExp>

Parameters

PredefExp is one of the following predefined expressions: ON|OFF.

Default is OFF.

Description

Switches the IMSI Attach/Detach flag in the System Information messages broadcast on the BCCH on or off. If ON,

the mobile must register and deregister with the network simulated by the 2201R when switched on or off,

respectively. This can be used to detect when the mobile is switched on and listening to the 2201R network.

Query

The query form of this command returns the current setting. The string delivered back contains one of the predefined

expressions as explained above.

Example

:CONFigure:GSM:BS:ATTach OFF

:CONF:GSM:BS:ATT?

Value returned: "OFF".

:CONFigure:GSM:MSTAtion:DRX

Syntax

:CONFigure:GSM:MSTAtion:DRX <int1>

Parameters

int1 is an integer.

The minimum value for int1 is 0, the maximum value is 7. The default value for int1 is 0.

Description

This command sets the BS-PA-MFRMS parameter, broadcast in the control channel description information element.

This parameter is used for discontinuous reception (DRX).

Note: The value entered here is coded according to the following scheme: the number of multiframes used is the

number entered here plus 2. This means that the default value (0) leads to a DRX period of two multiframes.

Query

The query form of this command returns the current setting. The string delivered back contains one integer.

Example

:CONFigure:GSM:MSTAtion:DRX 2

:CONF:GSM:MSTA:DRX?

Value returned: "2", resulting in a DRX period of four multiframes.

COBHAM 2201R Reference Guide

Other manuals for COBHAM 2201R