2201R Mobile Tester SCPI Reference Guide
Chapter 9 Call commands
47090/323
Copyright © 2016 Aeroflex Limited. All rights reserved.
175
:CALL:GSM:MSINfo:SMS
Syntax
:CALL:GSM:MSINfo:SMS
Parameters
There are no parameters.
Description
This query delivers back a boolean number indicating whether the mobile is able to handle short message service
(SMS) or not.
A 0 delivered back indicates that the mobile under test has no SMS capabilities.
Query
There is only a query form of this command available. The query delivers back one boolean number.
Example
:CALL:GSM:MSINfo:SMS?
The boolean number delivered back: "1".
:CALL:GSM:MSINfo:ATTached?
Syntax
:CALL:GSM:MSINfo:ATTached?
Parameters
There are no parameters.
Description
There is only a query form of this command available.
Query
The query delivers back one boolean number, indicating whether the mobile is GSM-attached to the base station
simulated by the 2201R. The GSM attach is usually part of the location update procedure. In a real network, the
mobile can be paged only when it is attached and a TMSI (temporary mobile subscriber identity) is assigned to the
mobile. Without the attach procedure, the mobile can be called (by its IMSI) if the Test SIM is being used.
Example
:CALL:GSM:MSINfo:ATT?
The boolean number delivered back: "1".
To Next Page
Loading...
Need help?
General