2201R Mobile Tester SCPI Reference Guide
Chapter 8 Configuration commands
47090/323
Copyright © 2016 Aeroflex Limited. All rights reserved.
94
:CONFigure:GSM:BS:BCC
Syntax
:CONFigure:GSM:BS:BCC <int1>
Parameters
int1 is an integer.
The minimum value for int1 is 0, the maximum value is 7. The default value for int1 is 0.
Description
This command sets the base station color code.
Query
The query form of this command returns the current setting. The string delivered back contains one integer.
Example
:CONFigure:GSM:BS:BCC 1
:CONF:GSM:BS:BCC?
Value returned: "1".
:CONFigure:GSM:BS:BCH:ARFCn
Syntax
:CONFigure:GSM:BS:BCH:ARFCn <int1>
Parameters
int1 is an integer.
The minimum value for int1 is 0, the maximum value is 1023. The default value for int1 is 63.
Description
This command sets the channel number for the 2201R base channel (BCCH).
Note: The base channel is sometimes also referred to as the "channel number of the main carrier".
Query
The query form of this command returns the current setting. The string delivered back contains one integer.
Example
:CONFigure:GSM:BS:BCH:ARFCn 60
:CONF:GSM:BS:BCH:ARFC?
Value returned: "60".
To Next Page
Loading...
Need help?
General