2201R Mobile Tester SCPI Reference Guide
Chapter 8 Configuration commands
47090/323
Copyright © 2016 Aeroflex Limited. All rights reserved.
135
:CONFigure:GPRS:TYPE
Syntax
:CONFigure:GPRS:TYPE <PredefExp>
Parameters
PredefExp is one of the following predefined expressions: GSM9001800|GSM9001900. Default is GSM9001800.
Description
Selects the type of GSM system to be used after the 2201R was brought into GSM call mode.
GSM9001800 makes the 2201R work as a test set for the GSM system types GSM 850/900 and GSM 1800.
GSM9001900 sets up the 2201R as a test set for the GSM system types GSM 850/900 and GSM 1900.
Notes
The main reason for this command to exist is the duplicate use of channels numbers. GSM 1800 and GSM 1900 use
the same channel numbers above channel number 511, but the related physical channels are in different frequency
bands.
Query
The query form of this command returns the current setting. The string delivered back contains one of the predefined
expressions as explained above.
Example
:CONFigure:GPRS:TYPE GSM9001900
:CONF:GPRS:TYPE?
Value returned: "GSM9001900".
:CONFigure:GPRS:SMS:MCLass
Syntax
:CONFigure:GPRS:SMS:MCLass <int1>
Parameters
int1 is an integer.
The minimum value for int1 is 0, the maximum value is 3. The default value for int1 is 0.
Description
This command allows to predefine the SMS data coding scheme message class.
Query
The query form of this command returns the current setting. The string delivered back contains one integer.
Example
:CONFigure:GPRS:SMS:MCLass 1
:CONF:GPRS:SMS:MCL?
Value returned in this example: "1"#
To Next Page
Loading...
Need help?
General