To Next Page

To Previous Page

2201R Mobile Tester SCPI Reference Guide

Chapter 8 Configuration commands

47090/323

134

:CONFigure:GPRS:MSTAtion:MSLot

Syntax

:CONFigure:GPRS:MSTAtion:MSLot <int1>

Parameters

int1 is an integer.

The minimum value for int1 is 1, the maximum value is 4. The default value for int1 is 2.

Description

This command sets the number of UL time slots that the mobile under test is commanded to use during multislot

testing.

Query

The query form of this command returns the current setting. The string delivered back contains one integer.

Example

:CONFigure:GPRS:MSTAtion:MSLot 4

:CONF:GPRS:MSTA:MSL?

Value returned: "4".

:CONFigure:GPRS:MSTAtion:PSLots

Syntax

:CONFigure:GPRS:MSTAtion:PSLots <int1>, <int2>, <int3>, <int4>

Parameters

int1 to int4 are integer parameters.

The minimum value for each intx is -26, the maximum value is 39. The resolution of each intx is 2, the default value

for each intx is 5.

Description

Sets the uplink power level in the range of -23 ... +39 dBm (GSM900) or -26 ... +36 dBm (upper band). Applies to GPRS

synchronous mode.

Query

The query form of this command returns the current setting. The string delivered back contains four integers.

Example

:CONFigure:GPRS:MSTAtion:PSLots -10,-6,0,6

:CONF:GPRS:MSTA:PSL?

Value returned: "-10,-6,0,6".

COBHAM 2201R Reference Guide

Other manuals for COBHAM 2201R