To Next Page

To Previous Page

2201R Mobile Tester SCPI Reference Guide

Chapter 8 Configuration commands

47090/323

158

:CONFigure:EGPRs:MSTAtion:PSLots

Syntax

:CONFigure:EGPRs:MSTAtion:PSLots <int1>, <int2>, <int3>, <int4>

Parameters

int1 to int4 are integer parameters.

The minimum value for each intx is -26, the maximum value is 39. The resolution of each intx is 2, the default value

for each intx is 5.

Description

Sets the uplink power level in the range of -23 ... +39 dBm (GSM900) or -26 ... +36 dBm (upper band). Applies to GPRS

synchronous mode.

Query

The query form of this command returns the current setting. The string delivered back contains four integers.

Example

:CONFigure:EGPRs:MSTAtion:PSLots -10,-6,0,6

:CONF:EGPRs:MSTA:PSL?

Value returned in this example: "-10,-6,0,6".

:CONFigure:EGPRs:TYPE

Syntax

:CONFigure:EGPRs:TYPE <PredefExp>

Parameters

PredefExp is one of the following predefined expressions: GSM9001800|GSM9001900. Default is GSM9001800.

Description

Selects the type of GSM system to be used after the 2201R was brought into GSM call mode.

GSM9001800 makes the 2201R work as a test set for the GSM system types GSM 850/900 and GSM 1800.

GSM9001900 sets up the 2201R as a test set for the GSM system types GSM 850/900 and GSM 1900.

Notes

The main reason for this command to exist is the duplicate use of channel numbers. GSM 1800 and GSM 1900 use

the same channel numbers above channel number 511, but the related physical channels are in different frequency

bands.

Query

The query form of this command returns the current setting. The string delivered back contains one of the predefined

expressions as explained above.

Example

:CONFigure:EGPRs:TYPE GSM9001900

:CONF:EGPRs:TYPE?

Value returned in this example: "GSM9001900".

COBHAM 2201R Reference Guide

Other manuals for COBHAM 2201R