2201R Mobile Tester SCPI Reference Guide
Chapter 11 Fetch commands
47090/323
Copyright © 2016 Aeroflex Limited. All rights reserved.
264
GSM commands
:FETCh:GSM:RFTX:GROup?
Syntax
:FETCh:GSM:RFTX:GROup?
Parameters
There are no parameters.
Description
There is solely a query form of this command available.
Query
The query form of this command returns the latest measurement result values of the sequence of RF TX
measurements as specified with the :CONF:MEAS:GRO:RFTX command and measured with the
:MEAS:GSM[:ARRay]:RFTX:GROup command. The string returned contains the related measurement result values. The
type of the measurement result values (i.e. floating point real numbers, integers or boolean numbers) depends on the
kind of measurements. The order of the measurement result values within the string is as described below for the
:FETCh:GSM:RFTX:ALL command.
Example
:CONF:MEAS:GRO:RFTX POW,PRMS
:MEAS:GSM:RFTX:GRO
:FETCh:GSM:RFTX:GROup?
In this example, the group of measurements is defined by a power measurement combined with a RMS phase error
measurement. The values returned in this example are:
"4.53,9.98".
To Next Page
Loading...
Need help?
General