2201R Mobile Tester SCPI Reference Guide
Chapter 4 Common commands
47090/323
Copyright © 2016 Aeroflex Limited. All rights reserved.
46
*OPT
Syntax
*OPT
Parameters
There are no parameters.
Description
The command form is not available.
Query
Returns the options that are included in this 2201R. A string with the installed options separated by commas is
returned.
Example
*OPT?
Returns in this example
"2201,MANUAL,REMOTE,AUTOTEST,GSM_CALL_MODE,GPRS_CALL_MODE,EDGE_GSMR_CALL_MODE"
*RST
Syntax
*RST
Parameters
There are no parameters.
Description
Resets the entire test set. All parameters, limits etc. are set to the internally predefined default values.
Query
There is no query form of this command available.
Example
*RST
To Next Page
Loading...
Need help?
General