2201R Mobile Tester SCPI Reference Guide
Chapter 10 Measurement commands
47090/323
Copyright © 2016 Aeroflex Limited. All rights reserved.
227
:MEASure:GPRS[:CONTinuous]:RFRX:BER:CII
Syntax
:MEASure:GPRS[:CONTinuous]:RFRX:BER:CII
Parameters
There are no parameters.
Description
Starts a continuous measurement of the (nonresidual) bit error ratio on the class II bits. To read out the latest
measurement result, use the :FETCh:GPRS:RFRX:BER:CII command.
Notes: The number of samples to be used for testing can be set, using the :CONF:GPRS:BER:COUNt command.
Query
The query form of this command starts the measurement and returns a measurement result value as soon as the first
measurement has been completed. The string delivered back contains one floating point real number, representing
the bit error ratio.
Example
:MEAS:GPRS:CONT:RFRX:BER:CII?
Measurement result string delivered back:
"0.2".
:MEASure:GPRS[:CONTinuous]:RFRX:BER:CRC
Syntax
:MEASure:GPRS[:CONTinuous]:RFRX:BER:CRC
Parameters
There are no parameters.
Description
Starts a continuous measurement of the (non-residual) bit error ratio on the class II bits. To read out the latest
measurement result, use the :FETCh:GPRS:RFRX:BER:CII command.
Notes:
- The number of samples to be used for testing can be set, using the :CONF:GPRS:BER:COUNt command.
Query
The query form of this command starts the measurement and returns a measurement result value as soon as the first
measurement has been completed. The string delivered back contains one floating point real number, representing
the bit error ratio.
Example
:MEAS:GPRS:RFRX:BER:CRC?
Measurement result string delivered back in this example:
"0.2".
To Next Page
Loading...
Need help?
General