2201R Mobile Tester SCPI Reference Guide
Chapter 8 Configuration commands
47090/323
Copyright © 2016 Aeroflex Limited. All rights reserved.
108
CONF:GSMR:VGCS:AUDio:LOOPback
Syntax
CONF:GSMR:VGCS:AUDio:LOOPback<val>
Parameters
<val> is one of the following predefined expressions - ON|OFF. Default is OFF.
Description
This command starts Audio Loopback during PTT scenario of MO VGCS Call. ON means that 2201R will start
Loopback. OFF means Loopback will be disabled.
Query
The query form will return the current status of VGCS Audio Loopback.
Example
CONF:GSMR:VGCS:AUDio:LOOPback ON
CONF:GSMR:VGCS:AUDio:LOOPback?
Value returned: "ON"
To Next Page
Loading...
Need help?
General