2201R Mobile Tester SCPI Reference Guide
Chapter 8 Configuration commands
47090/323
Copyright © 2016 Aeroflex Limited. All rights reserved.
152
:CONFigure:EGPRs:BS:ORIGinate
Syntax
:CONFigure:EGPRs:BS:ORIGinate <PredefExp>
Parameters
PredefExp is one of the following predefined expressions: ONRequest|ONLOcation.
Default is ONRequest.
Description
In GSM/GPRS, a TCH can be assigned either on request or as soon as the mobile has been registered (= immediately
after a location update).
ONRequest assigns a TCH only when either the mobile under test or the 2201R initializes a call.
ONLOcation assigns a TCH as soon as the registration has been completed.
Query
The query form of this command returns the current setting. The string delivered back contains the short-form
version one of the predefined expressions as explained above.
Example
:CONFigure:EGPRs:BS:ORIGinate ONLOcation
:CONF:EGPRs:BS:ORIG?
Value returned in this example: "ONLO".
:CONFigure:EGPRs:BS:PDTCh:ARFCn
Syntax
:CONFigure:EGPRs:BS:PDTCh:ARFCn <int1>
Parameters
int1 is an integer.
The minimum value for int1 is 0, the maximum value is 1023. The default value for int1 is 2.
Description
This command sets the frequency channel number of the simulated packet data traffic channel.
Query
The query form of this command returns the current setting. The string delivered back contains one integer.
Example
:CONFigure:EGPRs:BS:PDTCh 2
:CONF:EGPRs:BS:PDTC?
Value returned in this example: "2".
To Next Page
Loading...
Need help?
General