2201R Mobile Tester SCPI Reference Guide
Chapter 8 Configuration commands
47090/323
Copyright © 2016 Aeroflex Limited. All rights reserved.
160
:CONFigure:EGPRs:IDREquest
Syntax
:CONFigure:EGPRs:IDREquest <PredefExp>
Parameters
PredefExp is one of the following predefined expressions: OFF|ON.
Default is OFF.
Description
Switches the ID Request procedure during the Attach on or off
Query
The query form of this command returns the current setting. The string delivered back contains the short-form
version of one of the predefined expressions explained above.
Example
:CONFigure:EGPRs:IDREquest ON
:CONF:EGPR:IDRE?
Value returned in this example: "ON".
:CONFigure:EGPRs:BER:RSIGnalling:BITPattern
Syntax
:CONFigure:EGPRs:BER:RSIGnalling:BITPattern <PredefExp>
Parameters
PredefExp is one of the following predefined expressions: PRBS9|PRBS15|PRBS23|.
Default is PRBS9.
Description
This command selects the bit sequence to be transmitted by the RF generator in reduced signalling GMSK mode.
Query
The query form of this command returns the current setting. The string delivered back contains one of short-form
versions of the predefined expressions explained above.
Example
:CONF:EGPR:BER:RSIG:BITP PRBS15
:CONF:EGPR:BER:RSIG:BITP? Value returned: "PRBS15".
To Next Page
Loading...
Need help?
General