2201R Mobile Tester SCPI Reference Guide
Chapter 9 Call commands
47090/323
Copyright © 2016 Aeroflex Limited. All rights reserved.
168
:CALL:GSM:BERLoop
Syntax
:CALL:GSM:BERLoop <PredefExp>
Parameters
PredefExp is one of the following predefined expressions: ON|OFF.
Default is OFF.
Description
This command is used to close or open the internal loop of the mobile for BER testing.
ON means that the 2201R tells the mobile under test to close its internal loop, while
OFF makes the 2201R tell the mobile under test to open the internal loop.
Query
The query form of this command returns the current setting. The string delivered back contains one of the predefined
expressions explained above.
Example
:CALL:GSM:BERL ON
:CALL:GSM:BERL?
Value returned: "ON".
To Next Page
Loading...
Need help?
General