2201R Mobile Tester SCPI Reference Guide
Chapter 8 Configuration commands
47090/323
Copyright © 2016 Aeroflex Limited. All rights reserved.
113
:CONFigure:GPRS:BS:RLCMac:USF:INC
Syntax
:CONFigure:GPRS:BS:RLCMac:USF:INC <PredefExp>
Parameters
PredefExp is one of the following predefined expressions: ON|OFF.
Default is ON.
Description
Switches the auto-incrementing of the USF either on or off.
For further details regarding the USF, please refer to the description of the :CONFigure:GPRS:BS:RLCMac:USF
command above.
Query
The query form of this command returns the current setting. The string delivered back contains one of the predefined
expressions explained above.
Example
:CONFigure:GPRS:BS:RLCMac:USF:INC OFF
:CONF:GPRS:BS:RLCM:USF:INC?
Value returned: "OFF".
:CONFigure:GPRS:BS:RLCMac:RRBP[:DATA]
Syntax
:CONFigure:GPRS:BS:RLCMac:RRBP[:DATA] <PredefExp1>
Parameters
PredefExp1 is one of the following predefined expressions: N13|N17|N21|26.
Default is N13.
Description
This command sets the relative reserved block period (RRBP) in (asynchronous) generator/analyzer mode (please
refer to the description of the :CONF:CSYS:GPG command for further information).
The RRBP marks the block to which the USF parameter corresponds, in relation to the block currently used.
Query
The query form of this command returns the current setting. The string delivered back contains one of the predefined
expressions explained above.
Example
:CONFigure:GPRS:BS:RLCMac:RRBP:DATA N21
:CONF:GPRS:BS:RLCM:RRBP?
Value returned: "N21"
To Next Page
Loading...
Need help?
General