COBHAM 2201R - System:communicate:sera:remote; System:communicate:sera:terminator

2201R Mobile Tester SCPI Reference Guide
Chapter 5 System commands
47090/323
Copyright © 2016 Aeroflex Limited. All rights reserved.
59
:SYSTem:COMMunicate:SERA:REMote
Syntax
:SYSTem:COMMunicate:SERA:REMote <PredefExpr>
Parameters
PredefExpr can take on either of the following expressions: ON|OFF. Default is ON.
Description
Enables or disables remote control of the 2201R via the serial interface port COM 1.
Note: The remote control capability at COM 1 should be disabled prior to controlling external equipment (e.g. the
Bluetooth Connectivity Test products) through this interface.
Query
Returns the current setting.
Example
:SYST:COMM:SERA:REM OFF
:SYST:COMM:SERA:REM?
Returns the following string: "OFF"
:SYSTem:COMMunicate:SERA:TERMinator
Syntax
:SYSTem:COMMunicate:SERA:TERMinator <PredefExpr>
Parameters
PredefExpr can take on either of the following expressions: LF|CR|CRLF.
Description
The command defines the delimiter for SCPI control strings for the RS-232 interface.
Query
Reads and returns the current setting of the terminator used on the RS-232 interface.
Example
:SYST:COMM:SERA:TERM LF
:SYST:COMM:SERA:TERM?
Returns the following string: "LF"