2201R Mobile Tester SCPI Reference Guide
Chapter 8 Configuration commands
47090/323
Copyright © 2016 Aeroflex Limited. All rights reserved.
86
CONFigure:CSYStem:HSPa
Syntax
CONFigure:CSYStem:HSPa <PredefExp>
Parameters
PredefExp is one of the following predefined expressions:
OFF|HSDPa.
Default is OFF.
Description
Selects the type of communication system to be used for TDSCDMA. If CONFigure:CSYStem is set to
WCGenana|TDGenana|TDSCdma the HSDPA system can be set additionally. This setting should be done before the
CONFigure:CSYStem setting to save time.
Query
The query form of this command returns the current setting. The string delivered back contains the short-form
version of one of the predefined expressions explained above.
Example
:CONFigure:CSYStem:HSPa HSDPa
:CONF:CSYS:HSP?
Value returned: "HSDPa".
:CONFigure:COUPloss:STATe
Syntax
:CONFigure:COUPloss:STATe <PredefExp1>
Parameters
PredefExp1 is one of the following predefined expressions: ON|OFF.
Default is OFF.
Description
This command switches the use of a coupling loss table either on or off.
Note: Coupling loss tables are used to compensate e.g. losses in cables.
Query
The query form of this command returns the current setting. The string delivered back contains one predefined
expression as explained above.
Example
:CONFigure:COUPloss:STATe ON
:CONF:COUP:STAT?
Value returned: "ON"
To Next Page
Loading...
Need help?
General