2201R Mobile Tester SCPI Reference Guide
Chapter 2 Remote control of the 2201R Mobile Tester
47090/323
Copyright © 2016 Aeroflex Limited. All rights reserved.
23
The <Character Response Data> format defines the means by which mnemonic strings are sent between devices.
These strings contain only ASCII numeric digits, upper-case ASCII alphabetic characters, and the "_" character. They
must start with an uppercase ASCII alphabetic character, and cannot be more than 12 characters long. For example:
START
R2_D2
The <String Response Data> format defines how a device sends an arbitrary text string. It is the same as the listening
format except that double-quotes are legal characters but single-quotes are not. For example:
"You say hello"
Command subsystem overview
The various SCPI commands and their arguments/parameters are described below. Please note that any SCPI
command specified with an invalid parameter or without a required argument is totally ignored by the system. This
means that an incomplete SCPI command does not affect the current system status at all.
To Next Page
Loading...
Need help?
General