2201R Mobile Tester SCPI Reference Guide
Chapter 9 Call commands
47090/323
Copyright © 2016 Aeroflex Limited. All rights reserved.
187
:CALL:EGPRs:MODE
Syntax
:CALL:EGPRs:MODE <PredefExpr>
Parameters
PredefExp is one of the following expressions: TX|STOP|DETach.
Description
Initiates the signaling state required for the respective measurement, or leads back to idle mode.
TX starts the signaling required for transmitter measurements.
STOP initiates signaling to terminate the current uplink and/or downlink TBF.
DETach starts the signaling to resume GPRS idle mode.
Query
Returns the short form predefined expression for MODE.
Example
:CONF:EGPRs:MSTA:MSL 3
CALL:EGPRs:MODE TX
MEAS:EGPRs:MULT:TX:ALL?
Initiates a downlink TBF on three time slots, starts the transmitter measurements and returns results for three time
slots.
To Next Page
Loading...
Need help?
General