To Next Page

To Previous Page

2201R Mobile Tester SCPI Reference Guide

Chapter 8 Configuration commands

47090/323

117

:CONFigure:GPRS:BS:MSTAtion:MSLot

Syntax

:CONFigure:GPRS:BS:MSTAtion:MSLot <int1>

Parameters

int1 is an integer parameter.

The minimum value for int1 is 1, the maximum value is 4. The default value for int1 is 1.

Description

This command either sets the number of UL time slots expected by the 2201R (asynchronous mode) or the number

of UL time slots that the mobile under test is commanded to use (synchronous mode) during multislot testing.

Note: HSCSD or multislot testing requires the Multislot Option to be installed on your 2201R.

Query

The query form of this command returns the current setting. The string delivered back contains one integer.

Example

:CONFigure:GPRS:BS:MSTAtion:MSLot 4

:CONF:GPRS:MSTA:MSL?

Value returned: "4".

:CONFigure:GPRS:BS:BCC

Syntax

:CONFigure:GPRS:BS:BCC <int1>

Parameters

int1 is an integer.

The minimum value for int1 is 0, the maximum value is 7. The default value for int1 is 0.

Description

This command sets the base station color code.

Query

The query form of this command returns the current setting. The string delivered back contains one integer.

Example

:CONFigure:GPRS:BS:BCC 1

:CONF:GPRS:BS:BCC?

Value returned: "1".

COBHAM 2201R Reference Guide

Other manuals for COBHAM 2201R