To Next Page

To Previous Page

2201R Mobile Tester SCPI Reference Guide

Chapter 8 Configuration commands

47090/323

111

Commands for the GPRS option

:CONFigure:GPRS:BS:RCL

Syntax

:CONFigure:GPRS:BS:RCL <int1>

Parameters

int1 is an integer.

The minimum value for int1 is 1, the maximum value is 7. The default value for int1 is 1.

Description

This command sets the routing area color code. This code is used to indicate to the mobile that adjacent cells belong

to different routing areas. This parameter is broadcast by the 2201R in the SI3 and SI4 rest octets.

Query

The query form of this command returns the current setting. The string delivered back contains one integer.

Example

:CONFigure:GPRS:BS:RCL 3

:CONF:GPRS:BS:RCL?

Value returned: "3"

:CONFigure:GPRS:BS:RCO

Syntax

:CONFigure:GPRS:BS:RCO <int1>

Parameters

int1 is an integer.

The minimum value for int1 is 0, the maximum value is 255. The default value for int1 is 0.

Description

This command sets the routing area code. This code is used to indicate the routing area, the base station belongs to.

This parameter is broadcast by the 2201R in the SI13 rest octets.

Query

The query form of this command returns the current setting. The string delivered back contains one integer.

Example

:CONFigure:GPRS:BS:RC0 124

:CONF:GPRS:BS:RCO?

Value returned: "124"

COBHAM 2201R Reference Guide

Other manuals for COBHAM 2201R