2201R Mobile Tester SCPI Reference Guide
Chapter 8 Configuration commands
47090/323
Copyright © 2016 Aeroflex Limited. All rights reserved.
114
:CONFigure:GPRS:BS:RLCMac:RRBP:MODE
Syntax
:CONFigure:GPRS:BS:RLCMac:RRBP:MODE <PredefExp1>
Parameters
PredefExp1 is one of the following predefined expressions: ON|OFF.
Default is ON.
Description
This command indicates whether the value specified for the relative reserved block period (RRBP) is used by the
mobile (ON) or not (OFF) in (asynchronous) generator/analyzer mode (please refer to the description of the
:CONF:CSYS:GPG command for further information).
Query
The query form of this command returns the current setting. The string delivered back contains one of the predefined
expressions explained above.
Example
:CONFigure:GPRS:BS:RLCMac:RRBP:MODE OFF
:CONF:GPRS:BS:RLCM:RRBP:MODE?
Value returned: "OFF"
:CONFigure:GPRS:BS:RLCMac:PR
Syntax
:CONFigure:GPRS:BS:RLCMac:PR <PredefExp1>
Parameters
PredefExp1 is one of the following predefined expressions: RNG6|RNG14|RNG22|RNG30.
Default is RNG6.
Description
This command specifies the power reduction (PR) in (asynchronous) generator/analyzer mode (please refer to the
description of the :CONF:CSYS:GPG command for further information).
The power reduction the reduction in RF power (in dB) from the BCCH to the PDCH in downlink.
PredefExp1 indicates the range of the power reduction:
RNG6 stands for a power reduction of 0...6 dB,
RNG 14 indicates a power reduction of 8...14 dB,
RNG22 stands for a power reduction of 16...22 dB, while
RNG30 indicates a power reduction of 24...30 dB.
Query
The query form of this command returns the current setting. The string delivered back contains one of the predefined
expressions explained above.
Example
:CONFigure:GPRS:BS:RLCMac:RRBP:PR RNG6
:CONF:GPRS:BS:RLCM:RRBP:PR?
Value returned: "RNG6"
To Next Page
Loading...
Need help?
General