2201R Mobile Tester SCPI Reference Guide
Chapter 9 Call commands
47090/323
Copyright © 2016 Aeroflex Limited. All rights reserved.
167
:CALL:GSM:SMS:MSOR:NUMBer?
Syntax
:CALL:GSM:SMS:MSOR:NUMBer?
Parameters
There are no parameters.
Description
There is only a query form available.
Query
Upon the query, the 2201R returns the phone number of the last short message received.
Example
:CALL:GSM:SMS:MSOR:NUMB?
The string delivered back in this example is: ""+4989996410"".
:CALL:GSM:SMS:BSORiginate
Syntax
:CALL:GSM:SMS:BSOR <String1>,<String2>[,<String3>]
Parameters
String1 is a string of up to 160 characters containing the text of the short message to be sent.
String2 is a string of up to 24 characters containing the phone number that should appear in the phone under test as
the sender‘s number.
PredefExp is one of the following predefined expressions: UCS2|BIT8
It determines how the text should be coded.
Description
This command makes the 2201R send a short message to the phone under test. Text and sender‘s number can be
defined.
Query
A query form of this command is not available.
Example
:CALL:GSM:SMS:BSOR "Test message","12345"
This command makes the 2201R send a BS-originated short message.
To Next Page
Loading...
Need help?
General