2201R Mobile Tester SCPI Reference Guide
Chapter 4 Common commands
47090/323
Copyright © 2016 Aeroflex Limited. All rights reserved.
48
*SRE
Syntax
*SRE <int1>
Parameters
int1 is an integer. The valid range is from 0 to 255 (8 bits).
Description
Sets the enable filter (mask) of the service register.
int1 is the decimal representation of the binary mask.
The mask and the current contents of the seventh status register are ANDed.
Query
The query form reads out the mask currently set and returns its binary representation in a string.
Example
*SRE 68
As soon as an error occurs, bits 2 and 6 of the service register are set. ANDed with the mask 68, a binary 1 is the result.
To Next Page
