2201R Mobile Tester SCPI Reference Guide
Chapter 7 Format commands
47090/323
Copyright © 2016 Aeroflex Limited. All rights reserved.
82
FORMat:RESolution
Syntax
FORMat:RESolution <int1>
Parameters
int1 is an integer. The minimum value for <int1> is 0, the maximum is 20. The default value is 6.
Description
Defines the number of digits after the decimal point to be used for floating point real numbers.
Query
There is no query form of this command available.
Example
:FORM:RES 0
Defines that there are no digits after the decimal point.
To Next Page
