2201R Mobile Tester SCPI Reference Guide
Chapter 10 Measurement commands
47090/323
Copyright © 2016 Aeroflex Limited. All rights reserved.
195
:MEASure[:GSM][:CONTinuous]:RFRX:STOP
Syntax
:MEASure[:GSM][:CONTinuous]:RFRX:STOP
Parameters
There are no parameters.
Description
Stops a continuous measurement of the RF RX tests.
Note Stopping the test is not required since a test is automatically stopped when you start a new test.
Query
The query form of this command is not available.
Example
:MEAS:RFRX:RBER ALL
:MEAS:RFRX:STOP
Starts and stops a measurement.
To Next Page
Loading...
Need help?
General