COBHAM 2201R Reference Guide

2201R Mobile Tester SCPI Reference Guide
Chapter 10 Measurement commands
47090/323
Copyright © 2016 Aeroflex Limited. All rights reserved.
238
:MEASure:GPRS:ARRay:RFRX:RBER:CIB
Syntax
:MEASure:GPRS:ARRay:RFRX:RBER:CIB <int1>
Parameters
int1 is an integer.
The minimum value for int1 is 0, the maximum value is 100. The default value for int1 is 0.
Description
Performs the measurement of the residual bit error ratio of the class Ib bits a specific number of times (set with the
int1 parameter). To read out the entire measurement results array, use the :FETCh:GPRS:RFRX:RBER:CIB command.
Notes: The number of samples to be used for testing can be set using the :CONF:GPRS:BER:COUNt command.
Query
The query form of this command performs the measurement the specified number of times (<int1> parameter). As
soon as all measurements have been completed, all measurement result values are returned in a string. The string
delivered back contains <int1> floating point real numbers, representing the bit error ratios.
The single measurement results are separated by commas.
Example
:MEASure:GPRS:ARRay:RFRX:RBER:CIB? 5
The string returned is: "0.2,0.2,0.1,0.3,0.2".
:MEASure:GPRS:ARRay:RFRX:RBER:CII
Syntax
:MEASure:GPRS:ARRay:RFRX:RBER:CII <int1>
Parameters
int1 is an integer.
The minimum value for int1 is 0, the maximum value is 100. The default value for int1 is 0.
Description
Performs the measurement of the residual bit error ratio of the class II bits a specific number of times (set with the
int1 parameter). To read out the entire measurement results array, use the :FETCh:GPRS:RFRX:RBER:CII command.
Notes:
The number of samples to be used for testing can be set using the :CONF:GPRS:BER:COUNt command.
Query
The query form of this command performs the measurement the specified number of times (int1 parameter). As soon
as all measurements have been completed, all measurement result values are returned in a string. The string delivered
back contains int1 floating point real numbers, representing the bit error ratios.
The single measurement results are separated by commas.
Example
:MEASure:GPRS:ARRay:RFRX:RBER:CII? 5
The string returned is: "1.4,1.4,1.5,1.7,1.3".

COBHAM 2201R Specifications

General

Brand	COBHAM
Model	2201R
Category	Test Equipment
Language	English