2201R Mobile Tester SCPI Reference Guide
Chapter 5 System commands
47090/323
Copyright © 2016 Aeroflex Limited. All rights reserved.
58
:SYSTem:COMMunicate:TCPip:DHCP
Syntax
:SYSTem:COMMunicate:TCPip:DHCP <PredefExp>
Parameters
PredefExp can take on one of the following values: ON or OFF. The default is OFF.
Description
The command turns DHCP on or off. See section I/O Configuration for more details.
Query
Reads and returns the current setting of DHCP operation.
Example
:SYST:COMM:TCP:DHCP ON sets the software to use DHCP.
:SYSTem:COMMunicate:TCPip:MACaddr?
Syntax
:SYSTem:COMMunicate:TCPip:MACaddr?
Parameters
There are no parameters.
Description
There is solely a query form of this command available.
Query
This query gets the MAC address from the 2201R.
Example
SYST:COMM:TCP:MAC? "0050C221997D"
To Next Page
Loading...
Need help?
General