To Next Page

To Previous Page

2201R Mobile Tester SCPI Reference Guide

Chapter 8 Configuration commands

47090/323

127

:CONFigure:GPRS:BS:TCH:TYPE

Syntax

:CONFigure:GPRS:BS:TCH:TYPE <PredefExp>

Parameters

PredefExp is one of the following predefined expressions: FR|EFR.

Default is FR.

Description

This command sets the type of traffic channel.

FR stands for full rate and

EFR for enhanced full rate.

Query

The query form of this command returns the current setting. The string delivered back contains one of the predefined

expressions as explained above.

Example

:CONFigure:GPRS:BS:TCH:TYPE EFR

:CONF:GPRS:BS:TCH:TYPE?

Value returned: "EFR".

:CONFigure:GPRS:BLER:COUNt

Syntax

:CONFigure:GPRS:BLER:COUNt <int1>

Parameters

int1 is an integer parameter.

The minimum value for int1 is 0, the maximum value is 10000. The default value for int1 is 100.

Description

Defines the number of samples (blocks) for each BLER measurement. Applies to BLER measurements in GPRS

synchronous mode.

Query

The query form of this command returns the current setting. The string delivered back contains one integer.

Example

:CONFigure:GPRS:BLER:COUNt 1

:CONF:GPRS:BLER:COUNt?

Value returned: "1".

COBHAM 2201R Reference Guide

Other manuals for COBHAM 2201R