To Next Page

To Previous Page

2201R Mobile Tester SCPI Reference Guide

Chapter 8 Configuration commands

47090/323

150

:CONFigure:EGPRs:BS:MSLot:LEVel:UNUSed

Syntax

:CONFigure:EGPRs:BS:MSLot:LEVel:UNUSed <real1>

Parameters

real1 is a floating point real number.

The minimum value for real1 is -110.0, the maximum value is -10.0. The resolution of real1 is 0.1. The default value

for real1 is -60.0.

Description

Sets the power level that the 2201R transmits in the unused time slots in packet data mode (i.e. except in time slot 0

and the assigned PDCH slots). Applies to GPRS synchronous mode.

Query

The query form of this command returns the current setting. The string delivered back contains one real number.

Example

:CONFigure:EGPRs:BS:MSLot:LEVel:UNUSed -60.0

:CONF:EGPRs:BS:MSL:LEV:UNUS?

Value returned in this example: "-60.0".

:CONFigure:EGPRs:BS:NCC

Syntax

:CONFigure:EGPRs:BS:NCC <int1>

Parameters

int1 is an integer.

The minimum value for int1 is 0, the maximum value is 7. The default value for int1 is 2.

Description

This command sets the network color code.

Query

The query form of this command returns the current setting. The string delivered back contains one integer.

Example

:CONFigure:EGPRs:BS:NCC 2

:CONF:EGPRs:BS:NCC?

Value returned in this example: "2".

COBHAM 2201R Reference Guide

Other manuals for COBHAM 2201R