2201R Mobile Tester SCPI Reference Guide
Chapter 4 Common commands
47090/323
Copyright © 2016 Aeroflex Limited. All rights reserved.
47
*STB
Syntax
*STB
Parameters
There are no parameters.
Description
There is only a query form of this command available.
Query
Returns the decimal representation of the current contents of the service register in a string.
Note: This register is self-destructive: its contents are cleared after reading.
Example
A *STB? query returns "68". The return value of 68 (= 64 + 4) means that an error occurred (4).
*OPC?
Syntax
*OPC?
Parameters
There are no parameters.
Description
There is only a query form of this command available.
Query
Waits until previous command is completed. In addition, query returns the Operation Complete flag which is 1 in the
successful case.
Example
*OPC?
Returns "1"
To Next Page
Loading...
Need help?
General