To Next Page

To Previous Page

2201R Mobile Tester SCPI Reference Guide

Chapter 8 Configuration commands

47090/323

120

:CONFigure:GPRS:BS:LAI:MNC

Syntax

:CONFigure:GPRS:BS:LAI:MNC <int1>

Parameters

int1 is an integer.

The minimum value for int1 is 0, the maximum value is 99 for a two-digit MNC and 999 for a three-digit MNC; see

command :CONF:GSM:BS:LAI:MNC:FORMat. The default value for int1 is 1.

Description

This command sets the mobile network code.

Query

The query form of this command returns the current setting. The string delivered back contains one integer.

Example

:CONFigure:GPRS:BS:LAI:MNC 20

:CONF:GPRS:BS:LAI:MNC?

Value returned: "20".

:CONFigure:GPRS:BS:LAI:MNC:FORMat

Syntax

:CONFigure:GPRS:BS:LAI:MNC:FORMat <PredefExp>

Parameters

PredefExp is one of the following predefined expressions: TWODigits|THREedigits.

Default is TWODigits.

Description

This command sets the format of the mobile network code.

Query

The query form of this command returns the current setting. The string delivered back contains one of the predefined

expressions as explained above.

Example

:CONFigure:GPRS:BS:LAI:MNC:FORMat THRE

:CONF:GPRS:BS:LAI:MNC:FORM?

Value returned: "THRE".

COBHAM 2201R Reference Guide

Other manuals for COBHAM 2201R