To Next Page

To Previous Page

2201R Mobile Tester SCPI Reference Guide

Chapter 8 Configuration commands

47090/323

131

:CONFigure:GPRS:BER:RSIGnalling:BITPattern

Syntax

:CONFigure:GPRS:BER:RSIGnalling:BITPattern <PredefExp>

Parameters

PredefExp is one of the following predefined expressions: PRBS9|PRBS15|PRBS23|.

Default is PRBS9.

Description

This command selects the bit sequence to be transmitted by the RF generator in reduced signalling GMSK mode.

Query

The query form of this command returns the current setting. The string delivered back contains one of short-form

versions of the predefined expressions explained above.

Example

:CONF:GPRS:BER:RSIG:BITP PRBS15

:CONF:GPRS:BER:RSIG:BITP? Value returned: "PRBS15".

:CONFigure:GPRS:BER:RSIGnalling:COUNt

Syntax

:CONFigure:GPRS:BER:RSIGnalling:COUNt <int1>

Parameters

int1 is an integer parameter.

The minimum value for int1 is 100, the maximum value is 10000. The default value for int1 is 100.

Description

Defines the number of samples (blocks) for each GPRS reduced signaling BER measurement.

Query

The query form of this command returns the current setting. The string delivered back contains one integer.

Example

:CONF:GPRS:BER:RSIG:COUN 2000

:CONF:GPRS:BER:RSIG:COUN? Value returned: 2000.

COBHAM 2201R Reference Guide

Other manuals for COBHAM 2201R