2201R Mobile Tester SCPI Reference Guide
Chapter 9 Call commands
47090/323
Copyright © 2016 Aeroflex Limited. All rights reserved.
177
:CALL:GSM:MSINfo:TADVance
Syntax
:CALL:GSM:MSINfo:TADVance
Parameters
There are no parameters.
Description
This query delivers back the timing advance currently used by the mobile (in bit periods).
Query
There is only a query form of this command available. The query delivers back one integer.
Example
:CALL:GSM:MSINfo:TADVance?
The integer delivered back: "0".
:CALL:GSM:MSINfo:DUALband
Syntax
:CALL:GSM:MSINfo:DUALband
Parameters
There are no parameters.
Description
This query delivers back an integer indicating whether the mobile is able to use both the GSM and PCN frequency
ranges (GSM 900 and GSM 1800).
Query
There is only a query form of this command available. The query delivers back one integer indicating the supported
bands:
1 - P-GSM only
2 - E-GSM only
4 - GSM 1800 only
5 - P-GSM and GSM 1800
6 - E-GSM and GSM 1800
Example
:CALL:GSM:MSINfo:DUALband?
The integer delivered back is: "6".
To Next Page
Loading...
Need help?
General