To Next Page

To Previous Page

2201R Mobile Tester SCPI Reference Guide

Chapter 5 System commands

47090/323

:SYSTem:Message

Syntax

:SYSTem:Message <string1>

Parameters

string1 is a string (text) parameter. The maximum length of string1 is 255 characters.

Description

Writes the message specified with the string1 parameter to the internal system message queue of the instrument.

Query

Reads and returns the oldest unread message in the internal message queue. The string returned contains a maximum

of 255 characters.

Example

:SYSTem:MESSage "23.17,Procedure A5"

:SYST:MESS?

String returned: "23.17,Procedure A5"

In this example, a RAPID! program performs some internal calculations and then writes the result to the system

message queue. This result is then read by the external controller.

:SYSTem:COMMunicate:LOCal

Syntax

:SYSTem:COMMunicate:LOCal

Parameters

There are no parameters.

Description

Sets up the 2201R to allow manual operation on the front panel during SCPI operation.

Note: This command may be used e.g. to allow interactive alignment procedures in a production or quality assurance

flow.

Query

There is no query form of this command available.

Example

:SYSTem:COMM:LOC

COBHAM 2201R Reference Guide

Other manuals for COBHAM 2201R