2201R Mobile Tester SCPI Reference Guide
Chapter 11 Fetch commands
47090/323
Copyright © 2016 Aeroflex Limited. All rights reserved.
268
:FETCh:GSM:RFTX:POWer?
Syntax
:FETCh:GSM:RFTX:POWer?
Parameters
There are no parameters.
Description
There is solely a query form of this command available.
Query
The query form of this command returns the latest measurement result value(s) of the
MEAS:GSM[:ARRay]:RFTX:POWer measurement. The string delivered back contains at least one floating point real
number with the physical dimension of dBm.
Example
:MEAS:GSM:RFTX:POWer
:FETCh:GSM:RFTX:POWer?
The value returned is: "13.05".
:FETCh:GSM:RFTX:TEMPlate?
Syntax
:FETCh:GSM:RFTX:TEMPlate?
Parameters
There are no parameters.
Description
There is solely a query form of this command available.
Query
The query form of this command returns the latest result value(s) of the :MEAS:GSM[:ARRay]:RFTX:TEMPlate check.
The string delivered back contains at least one boolean number, representing the result of the check. A 0 indicates
that the burst measured was within the PTT specified, while a 1 means that the burst did violate the PTT.
The PTT is user-definable and can be set using the :CALC:GSM:RFTX:TEMP commands.
Example
:MEAS:GSM:ARR:RFTX:TEMPlate 10
:FETCh:GSM:RFTX:TEMP?
The values returned are: "0,0,0,0,0,0,0,0,0,0". This means that all the ten bursts checked were within the PTT.
To Next Page
Loading...
Need help?
General