2201R Mobile Tester SCPI Reference Guide
Chapter 11 Fetch commands
47090/323
Copyright © 2016 Aeroflex Limited. All rights reserved.
291
:FETCh:EGPRs:RFTX:ENFTh?
Syntax
:FETCh:EGPRs:RFTX:ENFTh?
Parameters
There are no parameters.
Description
There is solely a query form of this command available.
Query
The query form of this command returns the latest measurement result value(s) of the MEAS:EGPR[:ARR]:RFTX:ENFT
measurement. The string delivered back contains at least one floating point real number with the physical dimension
of %.
Example
:MEAS:EGPR:ARR:RFTX:ENFT 5
:FETC:EGPR:RFTX:ENFT?
The maximum error vector magnitude measurement is performed five times. The measurement results are stored
internally and read by the FETC command. An example of the string returned is: "4.33,5.53,1.97,3.41,2.79".
:FETCh:EGPRs:RFTX:EOFFset?
Syntax
:FETCh:EGPRs:RFTX:EOFFset?
Parameters
There are no parameters.
Description
There is solely a query form of this command available.
Query
The query form of this command returns the latest measurement result value(s) of the MEAS:EGPR[:ARR]:RFTX:EOFF
measurement. The string delivered back contains at least one floating point real number with the physical dimension
of dBc.
Example
:MEAS:EGPR:ARR:RFTX:EOFF 5
:FETC:EGPR:RFTX:EOFF?
The maximum error vector magnitude measurement is performed five times. The measurement results are stored
internally and read by the FETC command. An example of the string returned is: "4.33,5.53,1.97,3.41,2.79".
To Next Page
Loading...
Need help?
General