Rate Limiter: Disable or enable rate limiter.
Port Copy: Send a copy of packets to the selected port.
Shutdown: If enabled, the Managed Switch will shutdown the interface.
Any Frame Type:
MAC Parameters
DMAC Filter: Select an option from the pull-down menu for destination MAC filtering.
Select “Any” to filter any kind of traffic. Select “UC” to filter unicast traffic. Select “MC” to
filter multicast traffic. Select “BC” to filter broadcast traffic.
VLAN Parameters
VLAN ID Filter: Select “Any” or “Specific” for VLAN ID Filter. If “Specific” is selected, you
need to further specify a VLAN ID.
VLAN ID: Specify a VLAN ID.
Tag Priority: Select a tag priority from the pull-down menu.
To Next Page
Loading...
Need help?
General
