Datalogic DS8110 User Manual

DS8110 REFERENCE MANUAL
258
7
Error
Code
Description
Severity
Explanation
Symptom
Troubleshooting
Action required
182
Ethernet
Socket 5
Error
Error
Protocol Index
message not
received on User
Socket 5.
183
Ethernet
Socket 6
Error
Error
Protocol Index
message not
received on User
Socket 6.
191
Fieldbus
Mismatch
Error
Fieldbus module
type does not
match specified
model.
- Module selection
incorrect
compared to the
actual module
installed.
193
Fieldbus
Config Error
Error
Error configuring
fieldbus module.
- Unable to
communicate
to the module.
- Confirm that the
unit is not
communicating
to the host.
- Confirm that the
fieldbus
parameters are
configured
properly (see
section 4.5.8).
- Replace fieldbus
module.
195
Fieldbus
DHCP Error
Error
Profinet module
had a DHCP error.
- Unable to
acquire an IP
address.
- Confirm that the
unit is not
communicating
to the host.
- Confirm that
the fieldbus
parameters are
configured
properly (see
section 4.5.8).
- Replace fieldbus
module.
205
APD
Temperature
Error
Error
APD Temperature
sensor is not
working. A
fluctuation in the
scanner's
temperature can
have an adverse
effect on several
internal functions
of the scanner. The
scanner monitors
the temperature,
and if it is erratic,
this error is posted.
- The scanner
may experience
an increase in
no-reads.
- The scanner
may start
missing the
transmit point.
1. Cycle power on
the scanner;
2. Wait until the
unit has time to
cool down.
3. Restart the
scanner and
monitor it to
determine
whether the
error reoccurs.
This is an internal
failure and is not
field serviceable.
- Replace scanner.

Datalogic DS8110 Specifications

General

Brand	Datalogic
Model	DS8110
Category	Barcode Reader
Language	English