Delphin ProfiMessage - Page 129

ProfiMessage
4.7.14.3.2 Controller1tab

Manual operation:Enablethisoptiontoswitchbetweenautomaticmodeand
manualoperation.
On/Off:Givethesourcechannelbywhichtheswitchbetweenautomaticmodeand
manualoperationistooccur.Ifavalueis≥1.0,themanualvalue(seebelow)will
beoutputasmanipulatedvariable(y).
Manual value:Givethesourcevaluewhichdeliversthe“manualvalue”.
D2 term (Td):OptionalsecondDtermofcontroller.
129
Delphin Technology AG
Dezember 2015
ProfiMessage Manual